Connect with us

Education

Generous donation from Alumni bolsters LTCHS Music Program with special “Roadhammers” guitar

Published

4 minute read

Lindsay Thurber alumnus craft custom guitar for a good cause

A guitar with special meaning is coming home thanks to two Lindsay Thurber Comprehensive High School Music Program alumnus who are passionate about supporting youth and strive to make a meaningful difference in the community.

As part of their quest to help make a difference, this year Jennah Salls and Jazdn Moore decided to support the Clayton Bellamy Foundation for the Arts by building an electric guitar made from all local wood in Central Alberta. Proceeds from the event will help support the build of an arts centre in Lakeland.

“This guitar project sparked from a combination of everything we’re passionate about. Being such big fans of music and its impact, alongside our goal to give back to our community as much as possible, once we discovered the Clayton Bellamy Foundation, the vision all came together,” said Jennah. “We wanted to build this guitar to have the experience under our belt and since it had so much potential to be a part of something bigger, it was a no brainer to tie it into the Clayton Bellamy Foundation.”

Construction of the guitar began under the mentorship of local luthier David Gilmore with Gilmore Guitars. “We then decided to kick it up a notch by starting a fundraiser around our community with the hopes of raising as much money as possible for the Foundation’s cause,” said Jazdn.

The guitar was auctioned off at the Clayton Bellamy Foundation For The Arts event in Bonnyville earlier this month.

“This fundraiser also was designed to try and raise the winning bid to be able to bring the guitar back to Red Deer considering that the auction for the foundation takes place outside of our community,” said Jennah. “Our mission was to get it into the hands of other youth by donating it to the LTCHS music program as alumni. To further support Clayton’s amazing objective, we also decided to put in a custom made coffee station, coffee table and end table set as an auction item. It’s just been an incredible journey building this guitar and dreaming bigger and bigger as each day goes by and we simply want to make the biggest impact possible with this project!”

Thanks to the generous support of the community, Jennah and Jazdn were able to put a winning bid of $11,000 for the guitar. The custom furniture also went for $8,500.

As a result, the custom built guitar was given to Lindsay Thurber so that students in the music program can have an opportunity to play it and feel its impact.

“We are so grateful to benefit from Jennah and Jazdn’s commitment to the arts and their passion for supporting the community,” said Jennifer Mann, Music Director at Lindsay Thurber. “The story of the guitar and Jennah and Jazdn’s generosity will live on for years to come through our music program.”

Education

Schools shouldnā€™t sacrifice student performance to vague notions of ā€˜equityā€™

Published on

From the Fraser Institute

By Derek J. Allison

According to a new study published by the Fraser Institute, if Canada wants to remain competitive with emerging economies around the world, we must increase our math, science and reading scores—and not simply pursue high levels of “equity and inclusion” as the primary goal for our schools.

Indeed, highly equitable and inclusive schools—with declining PISA scores, as is currently the case in Canada—do a disservice to students and society at large.

Why? Because higher test scores translate into greater “knowledge capital”—that is, the full body of knowledge available to an economy—and boost economic growth (and, incidentally, the tax revenues that fund our schools).

Indeed, the goal should be equitable access to a quality education. And the most realistic and meaningful way to measure student progress is through PISA tests, which every three years assess the performance of 15-year-olds worldwide in core subjects of math, science and reading rather than the limited curriculum objectives used in provincial testing, which can only show progress or decline within individual school systems. In today’s world, where competition is truly global, we must know how our students and schools perform compared to their peers in other countries, especially the “Asian Tigers” of Hong Kong, Korea, Singapore and Tiawan whose rapidly growing economies have been driven by rising PISA scores.

Obviously, countries with higher test scores can teach other countries how to improve—although there are limits and some traps here. Attempting to cut and paste Singapore’s or Korea’s much more meritocratic systems of highly competitive student assessment and selection would be impractical and impolitic in Canada. Even so, policymakers should consider reinstating more meaningful meritocratic norms in Canadian schools to encourage and recognize academic achievement. Nothing succeeds like success, except recognized and rewarded success.

Closer to home, other provinces could benefit from considering why Quebec is such a stellar performer in math and why Alberta has the highest overall PISA test score average of all provinces.

But fair warning, recent attempts at school improvement in Canada show that top-down one-size-fits-all changes—including extending compulsory attendance, reducing average class size and tinkering with course content—have had little positive effect on student performance, although they may please teacher unions. If policymakers want to achieve more equitable success for more students, they should introduce more flexibility, school autonomy and choice into our top-heavy centrally regulated school systems. In this respect it may be no accident that the three highest performing, mid-spending provincial K-12 education systems (Alberta, Quebec and Ontario) offer relatively high levels of school choice, although of quite different kinds.

Equity and inclusion are noble goals, but they shouldn’t interfere with student progress. There’s too much at stake, for students and the country.

Continue Reading

Alberta

Expansion planned for Centre for Innovation in Manufacturing at Red Deer Polytechnic

Published on

Investing in innovation at Red Deer Polytechnic

Alberta’s government is expanding student capacity and creating a modern learning environment at Red Deer Polytechnic that will help graduates succeed in the economy of tomorrow.

To support emerging opportunities for students, Alberta’s government will invest $12.9 million to expand the Centre for Innovation in Manufacturing Technology Access Centre (CIM-TAC) at Red Deer Polytechnic (RDP). CIM-TAC is an applied research and innovation centre that gives companies access to state-of-the-art prototyping and manufacturing equipment, along with a multi-disciplinary team with the expertise to turn brilliant ideas into market-ready products.

As Alberta’s economy grows and diversifies, job creators will increasingly seek employees with the skills required to work in advanced manufacturing.

Construction will begin in early 2025 and will increase the centre’s applied research, education and training capacity. The expanded CIM-TAC will grow to provide work-integrated learning opportunities for an estimated 450 post-secondary students and training through workshops and events to an additional 2,000 students annually by 2030. Additionally, more than 500 junior and senior high school students will take part in dual credit programs at the CIM-TAC.

“Investing in this expansion of CIM-TAC will give students at RDP access to cutting-edge technology and skills to succeed in the economy of tomorrow. The strategic investments we’re making in Budget 2024 are part of a forward-looking path to support the goals of our post-secondary institutions, grow Alberta’s economy and create jobs.”

Rajan Sawhney, Minister of Advanced Education

“The expansion will allow Alberta-based manufacturers across multiple sectors to have greater ability to develop, test and scale their ideas. Students will be engaged at the forefront of made-in-Alberta technologies and manufacturing solutions.This investment will help meet high demand from entrepreneurs and industry for applied research and will take the facility beyond its current capabilities to become an advanced technology training and hands-on learning centre.”

Nate Horner, President of Treasury Board and Minister of Finance

“This expansion project will build on the CIM-TAC’s 15 years of success and leverage the centre’s industry partnerships and manufacturing expertise to provide even more capacity for applied research, as well as education, training and work-integrated learning opportunities for students. We thank the Government of Alberta for this investment that will benefit not only RDP students and researchers, but also the entire central Alberta region and its critical industries like health care, agriculture, energy and construction.”

Stuart Cullum, president, Red Deer Polytechnic

“Manufacturing and advanced manufacturing are driving job-creation, economic growth and made-in-Alberta solutions that improve the lives of people around the world and right here at home. The funding to expand RDP’s CIM-TAC is an investment that will allow Alberta companies greater access to the tools, technology and next generation of skilled talent that will allow our industry to solve real-world challenges, develop better products and ultimately increase productivity.”

Darryl Short, CEO, Karma Machining and Manufacturing, and president, Karma Medical Products  

Quick facts

  • The expansion of CIM-TAC at RDP will support a variety of sectors through advanced manufacturing capabilities, including energy innovation, transportation, aviation and agriculture. The centre will also support RDP’s future expansion into more medical device manufacturing and health-care innovations to support both patients and providers.
  • RDP’s expansion of the CIM-TAC will grow the facility’s footprint from 15,000 square feet to 25,000 square feet.
  • The CIM-TAC currently houses $7.6 million of advanced manufacturing equipment.
  • In 2022, RDP attracted more than $2 million in applied research investment. RDP also completed 64 projects for 57 companies and participated in more than 1,300 engagements with industry partners.
  • Since the CIM-TAC’s inception in 2009, RDP has supported more than 300 industry partners (including repeat clients).
Continue Reading

Trending

X