Connect with us

Alberta

Financial boost will engage Red Deer Polytechnic with partners working on medical device innovations

Published

5 minute read

Red Deer Polytechnic’s CIM-TAC receives national funding

Two years after being designated a Technology Access Centre through a grant from the Natural Sciences and Engineering Research Council (NSERC), Red Deer Polytechnic’s Centre for Innovation in Manufacturing (CIM-TAC) is celebrating new funding. The national funding – and the equipment it supports – were highlighted at the CIM-TAC Open House, hosted yesterday at the industrial research facility.

“The Open House provided an opportunity for stakeholders and community members to come to CIM-TAC and gain a better understanding of the first-class innovation and opportunities that are available here,” says Jim Brinkhurst, Interim President of Red Deer Polytechnic. “The prestigious grant funding that the CIM-TAC has received over recent years allows us to grow the knowledge, expertise and equipment available to support research and innovation – in central Alberta and beyond.”

NSERC announced in April that the CIM-TAC would receive $300,000 over two years in an Applied Research and Technology Partnership (ARTP) grant to promote the growth of innovations in health care assistive devices in Alberta. CIM-TAC’s business and industry clients will be able to accelerate commercialization of their devices through the addition of engineers and technologists with specialties in mechanics, mechatronics and robotics, as well as students in engineering, business, and health sciences to assist on projects.

“The TAC grant in 2020 allowed us to increase our capabilities to include design engineering and material experts,” says Dr. Tonya Wolfe, CIM-TAC Manager. “The additional staff we’ll be able to take on with the ARTP grant will give us an integrated team of specialists capable of accelerating new product development for our industry clients. Additionally, we will be able to provide a new focus area for central Alberta’s existing manufacturing base, many of whom have already expressed a desire to find areas for new opportunities as the traditional economy of our region changes.”

The majority of medical devices used in our healthcare system are imported. By encouraging the growth of innovations in health care assistive devices in the region, it will enable Alberta’s manufacturers to diversify into this market through the adoption and integration of digital manufacturing, which is key to meeting the changing realities of Alberta’s economy.

“With our enhanced capacity, CIM-TAC is able to provide Alberta’s assistive health care companies an integrated one-stop applied research shop to accelerate the commercialization of their homegrown innovations,” says Wolfe. “Our expertise includes design for manufacturing, validation, and manufacturing optimization – all intended to support SMEs at every stage of the innovation cycle as they focus on improving their manufactured products and processes.”

Darryl Short of Karma Medical Products (KARMED) gave a keynote address at the Open House event about his collaboration with the CIM-TAC in the development of a system for hand and upper extremity therapy. The product assists patients in gaining flexibility, strength, and functional independence. CIM-TAC worked with KARMED on prototyping and in the scale up stage.

“Through our recent funding and the opportunities it provides, Red Deer Polytechnic’s CIM-TAC is positioned to collaborate with innovators and industry to meet an important need across our province,” says Brinkhurst. “We look forward to working with our partners and stakeholders to achieve positive short-term and long-term goals that will benefit Albertans.

About the Centre for Innovation in Manufacturing (CIM-TAC):

While its Technology Access Centre designation was awarded in 2020, the CIM opened in 2009 as one of the key facilities of RDP’s Four Centres. Since then, they have collaborated with hundreds of small and medium sized businesses and entrepreneurs to create solutions to numerous real-world manufacturing challenges. In 2021, the CIM-TAC had more than 500 engagements with business and industry clients interested in applied research and advanced manufacturing. Out of these, 28 new products and processes were developed, and 41 existing products were improved.

 

Alberta

ASIRT investigations concluded on fatal officer-involved shooting involving the RCMP.

Published on

Incident investigation report from the Alberta Serious Incident Response Team (ASIRT)

Introduction

On December 22, 2022, the Alberta Serious Incident Response Team (ASIRT) was directed pursuant to s. 46.1 of the Police Act to investigate a then non-fatal Royal Canadian Mounted Police (RCMP) officer-involved shooting. The shooting of the affected person (AP) was reported to have happened during an interaction with him, as a result of him being a suspect in a complaint of a man with a gun.

While AP initially survived, he died of complications from the shooting the following day.

ASIRT’s Investigation

ASIRT’s investigation was comprehensive and thorough, conducted using current investigative protocols and principles relating to Major Case Management. Information from civilian witnesses, the subject and a witness officers, and importantly video recordings provided sufficient information to determine whether the force used by the subject officer during this incident was reasonable.

Circumstances Surrounding the Officer-Involved Shooting

On December 01, 2022, Maskwacis RCMP received a call reporting that a male [AP] had been drinking and left the caller’s house with a gun. AP was shooting the gun in the country (believed to be the area around the residence). Two RCMP officers responded.

Witness officer (WO) located AP walking on the road with a rifle. AP walked toward WO’s marked police vehicle with the rifle pointed at the vehicle/WO, while WO was seated in the driver’s seat. WO then exited his vehicle with his carbine rifle and moved to the rear of his vehicle while AP kept the rifle pointed at the police vehicle. The subject officer (SO) arrived on scene, but came from the opposite direction. AP turned around and walked toward SO with the barrel of the rifle pointed upwards. SO exited his police vehicle with his service pistol drawn and walked toward AP while he
repeatedly provided verbal direction to AP to drop the firearm. AP and SO were walking toward each other; at that time AP still had the barrel of the rifle pointed upward. As SO and AP got within approximately five meters of each other, AP lowered the barrel of the rifle and pointed it directly at SO. SO fired multiple rounds and struck AP with four rounds causing AP to stumble, drop the rifle and fall to the ground. AP initially survived the shooting and was transported to an Edmonton hospital, where he underwent emergency surgery. The following day, AP succumbed to his injuries.

Analysis

The subject officer was lawfully placed and acting in the execution of his duties in dealing with AP as a person who was the subject of a complaint about him being in possession of a firearm and shooting it off.

The Use of Force

Under s. 25 of the Criminal Code, police officers are permitted to use as much force as is necessary for the execution of their duties. Where this force is intended or is likely to cause death or grievous bodily harm, the officer must believe on reasonable grounds that the force is necessary for the self-preservation of the officer or preservation of anyone under that officer’s protection.

A police officer’s use of force is not to be assessed on a standard of perfection nor using the benefit of hindsight.

With the benefit of hindsight, time for detached reflection and knowledge of the ultimate outcome, it is easy to speculate about how things could have been done differently. That is not the standard, however, against which an officer’s conduct is measured. The question is, applying principles of proportionality, necessity, and reasonableness, whether the force used falls into a range of possible reasonable responses.

Proportionate Response

Proportionality requires balancing a use of force with the action to which it responds. Here, the subject officers were faced with an individual that was armed with a gun and pointing it in their direction. As such, the response by the subject officers in using their respective firearms to shoot AP was proportionate to the threat of death or grievous bodily harm that he reasonably posed to both of them.

Reasonably Necessary

As set out previously in this report, AP presented as a lethal threat to both SO and WO given his actions in pointing his rifle at them. While WO did not shoot during this incident that does not impact the analysis of SO’s actions. Under the circumstances as then faced by SO, no other use of force options were reasonably available for attempted use. The use by SO of his firearm to incapacitate this lethal threat was reasonably necessary. Given the above, the defence available to SO under s. 25 of the Criminal Code would apply.

Conclusion

Under s. 25 of the Criminal Code a police officer is justified in doing what he or she is authorized to do and to use as much force as is reasonably necessary where he or she has reasonable grounds to do so. Force intended to cause death or grievous bodily harm is justified if the officer believes, on reasonable grounds, that the force was necessary to prevent the death or grievous bodily harm of the officer and/or any other person. The analysis under s.34 of the Criminal Code leads to a similar finding that subject officer’s actions were lawfully permitted.

After a thorough, independent and objective investigation into the conduct of the subject officers, it is my opinion that they were lawfully placed and acting properly in the execution of their duties. There is no evidence to support any belief that any officer engaged in any unlawful or unreasonable conduct that would give rise to an offence. The force used was proportionate, necessary and reasonable in all the circumstances.

Continue Reading

Alberta

Alberta requests more control over provincial immigration system

Published on

Alberta is requesting more control over its provincial immigration to address its skilled workforce shortage, including increasing Ukrainian evacuee participation in the job market.

Premier Danielle Smith has written a letter to Prime Minister Justin Trudeau asking him to re-evaluate his government’s decision limiting the number of allocations for Alberta’s provincial nominee program in 2024. Last week, the federal government informed the province it would only receive 9,750 such allotments – which is the same number of allocations Alberta received in 2023 and is less than the 10,140 for 2024 the federal government had originally allocated.

As of February 2024, Alberta accounts for just under 12 per cent of Canada’s population, but it leads the nation in net employment growth, with 42.8 per cent of the country’s employment gains between January and February 2024. By not providing the requested increase to Alberta’s provincial nominee allocations, the federal government is restricting the province’s ability to keep up with its growing labour market demands, especially as it relates to integrating Ukrainian evacuees into Alberta’s job market.

“Alberta is growing and that is good news. Since January 2023, more than 100,000 new jobs have been created in our province and our employment rate has led the country even longer. At the same time, we continue to experience labour shortages that could be resolved by welcoming skilled workers from around the world, including evacuees from Ukraine, many of whom have the exact skills that our job market most needs. Alberta has long been the economic engine of Canada and we are once again requesting Ottawa respect section 95 of the Constitution and let us welcome the skilled individuals we need into our province on our terms.”

Danielle Smith, Premier

With Alberta’s population growth at levels not seen in four decades, Alberta’s Provincial Nominee Program is best placed to address the province’s unique immigration and economic goals.

Part of Alberta’s population growth has resulted from Russia’s invasion in Ukraine on February 24, 2022. Since that time, Alberta has welcomed a significant number of Ukrainian evacuees to the province. While it is anticipated that many will return to Ukraine following the war, Alberta is also expecting a number of families to apply for permanent residency via the Alberta Advantage Immigration Program. An increase in the number of allocations from the federal government would assist these new Albertans to fill positions in the province’s workforce.

“Immigration is key to Alberta’s ability to address labour shortages and to grow our economy. This limitation imposed by the federal government on our provincial nominee program will be a very difficult pill to swallow, not only for businesses that need this skilled labour but also to the many Ukrainian evacuees who have the skills we need and wish to stay permanently in Alberta.”

Muhammad Yaseen, Minister of Immigration and Multiculturalism

Quick facts

  • The federal government through Immigration, Refugees and Citizenship Canada sets provincial immigration nomination limits. It also approves all permanent resident applications.
  • Alberta maximized its 9,750 nomination allocations in 2023, with a total of 10,029 nominations issued within the federal government administrative buffer.

Related information

Continue Reading

Trending

X